Menu Settings; Changing Settings - Siemens TI 903 Series User Manual

en Menu settings
Q

Menu settings

This menu is used for changing settings
M e n u s e t t i n g s
individually, accessing information and
starting a programme.

Changing settings

Press and hold the $/± button for at
1.
least 5 seconds to open the "Menu".
The different setting options will
appear in the display.
Make the desired setting using the
2.
rotary selector.
The current setting is highlighted in
colour on the display.
Press the navigation button under
3.
"select".
Use the rotary selector to change the
4.
setting.
The following settings are available:
Settings
Language
Water hardness
Switch off after
Brightness display
Beverage info
Factory settings
50
Possible settings
Different languages
1 (soft)
■
2 (medium)
■
3 (hard)
■
4 (very hard)
■
15 minutes
up to
3 hours
Level 1 up to level 10
Standard setting 7
Shows the volume of drinks dispensed since the appliance was commissioned.
For technical reasons, the counter does not represent a precise number of cups.
Appliance reset to factory set-
tings
Press the navigation button under
5.
"confirm".
The setting has been saved.
Press the $/± button to exit the
6.
"Menu".
The drink selection appears on the
display.
Notes
You can switch to the previous level
■
by pressing the navigation button
under "back".
The setting procedure can be
■
aborted by pressing the navigation
button under "abort".
Press the $/± button to exit the
■
menu at any time.
If no entry is made within approx. 2
■
minutes, the menu closes
automatically and the settings are
not saved.
Explanation
Setting the language to be used for display texts.
Setting in line with the hardness of the local
water supply.
The preset water hardness is level 4 (very hard).
The water hardness can, for example, be
requested from your local water supplier.
It is important to set the water hardness cor-
rectly, so that the appliance indicates accurately
when the descaling programme should be run.
Setting that governs how long the appliance
should wait after the last beverage preparation
before it automatically switches itself off.
The factory setting is 30 minutes.
Setting that governs the brightness of the dis-
play
Resets all your own settings to the condition
when delivered.