Dell C2660dn Quick Reference Manual page 2

Loading Letterhead
The pre-printed paper such as letterhead and pre-punched paper must be inserted bottom edge first
with the print side facing down as shown below.
Tray1 and optional 550-sheet feeder
Print side face down Print side face down
NOTE: Set Letterhead 2 Sided or Letterhead Duplex Mode to Enable and Paper Type to Letterhead, Preprinted, or
Prepunched from the operator panel or the printer driver even when you print on a single side of letterhead, pre-printed,
or pre-punched paper.
Loading an Envelope in the MPF
Load envelopes in the MPF as shown in the illustrations below.
CAUTION: Never use envelopes with windows, coated linings, or self-stick adhesives. These lead to paper jams and can
cause damage to the printer.
NOTE: If you do not load envelopes in the MPF right after they have been removed from the packaging, they may bulge.
To avoid jams, press firmly across the whole envelopes to flatten them before loading the envelopes in the MPF.
NOTE: The maximum height (quantity) of envelopes that can be loaded in the MPF is approximately 15 mm (0.59 inches)
(15 envelopes).
Envelope #10, Monarch or DL size
MPF Page orientation
Letterhead enters the printer last
C5 size
or
Identifying the Location of Paper Jams
CAUTION: Do not attempt to clear any jams using tools or instruments. This may permanently damage the printer.
The following illustration shows where paper jams may occur along the print media path.
4 3 2
1 Fusing Unit
2 Tray1
3 MPF
4 Optional 550-Sheet Feeder
Finding Information
For more information, access the Dell Printer Setup in the "Software and Documentation disc".
• Installation Video
Setup instructions for printer hardware and
optional accessories.
1
• User's Guide
Additional information about printer
components, consumable replacement,
available software, and troubleshooting.
dell.com/support