Table of Contents
Advertisement
2. For Attendant Console :
To store System Speed Dial numbers (at Console only):
To define a specific CO line for Speed Dialing:
* After or before dialing stored telephone number, User can assign a CO line for the stored
numbers.
,
To exit:
* Other signal for stored number when storing data:
Key
Pause
Flash
Pulse to Tone
22
,
SPD CODE /
. Handset on hook / [SPK] key off.
. Press [PRG] key.
. Dial [8], [8].
. Dial the Speed Access Code or a programmed DSS key.
. Dial stored numbers (Max.30 digits).
. Press [SAVE] key.
,
SPD CODE /
. Handset on hook / [SPK] key off.
. Press [PRG] key.
. Dial [8], [7].
. Dial the Speed Access Code then Press [SAVE] key.
. Dial stored numbers (Max. 30 digits).
. Press [SAVE] key to exit.
. Press [MIC/AT] key then dial the CO line number
01-08 for G1-824, or 00 for Automatic CO Selection.
. Press [SPK] key.
Meaning
LCD display
"P"
"F"
"T"
Digital Phone Operation G. STATION PROGRAMMING
Advertisement
Table of Contents
