Table of Contents
Advertisement
G.03 Volume Control (Setting)
This program can adjust the Volume of Digital Phones. There are five types of Volume
you can adjust - Ring, Speaker, Handset, Ring Volume Up Gradually, Ring Frequency.
Program the Volume for your Telephone:
CODE
To Set or Cancel the ARing Volume Up Gradually@ method is:
To Save
To Cancel
To Set the Ring Frequency:
. 8 ring frequencies can be selected.
The method is:[PRG], [6], [5] then key in your choice[1]~[8].
During Conversation, Adjust the Volume:
/
G.04 Store Speed Dial/One Touch Dial
Speed Dial automatically dials the stored telephone numbers.
There are two types of Speed Dial: Personal (Extension) and System.
To store Personal Speed Dial numbers:
1. For general Extension:
G. STATION PROGRAMMING Digital Phone Operation
,
. Handset on hook / [SPK] key off.
. Press [PRG], [6].
. Dial [1] for setting Ring Volume,
/
[2] for setting Speaker Volume,
[3] for setting Handset Volume,
. Press [#] key for Volume Up.
. Press [*] key for Volume Down.
. Press [PRG], [6], [4]
show "Save."
. Press [PRG], [6], [4]
show "Cancel."
. Press [VOL • • ] key for voice up.
. Press [VOL – – ] key for voice down.
,
SPD CODE /
. Handset on hook / [SPK] key off.
. Press [PRG] key then Dial [8].
. Dial the Speed Access Code / Press a programmed DSS key.
PERSONAL SPEED ACCESS CODE
. Dial stored numbers (Max.30 digits).
. Press [SAVE] key.
6
Confirmation Tone and the LCD will
6
Confirmation Tone and the LCD will
0 - 9
DSS KEY
1-10
21
Advertisement
Table of Contents
