Page 1
Description & Instructions DK9 Series Digital Deskphone July 2014 www.hybrex.com.au...
Page 2
This document or any parts thereof are not to be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying, recording, or information storage and retrieval systems for any purpose whatsoever without the express written permission of Auto Telecom Company Ltd. │ www.hybrex.com.au...
1. Introduction This manual provides the Hardware Description, Installation and Programming information of DK9-25, DK9-15 phones and DK9-DSS console. Figure 1-1 DK9-25 Figure 1-2 DK9-15 Figure 1-3 DK9-DSS www.hybrex.com.au │...
CO Line Names • Dialed Telephone Number • Last Number Redial • Absent Messages • Phone / System Setting Values • Speed Dial Directory • Speed Dial Number • Status of Operation/Function • Time • Voice Mail Messages www.hybrex.com.au │...
6. Not used 7. Connects to DK9-DSS 8. Connects to G2-STU2 Note: 1. 4-conductor wiring (with two digital ports) is required for the DK9-25 if DK9- DSS console is connected. 2. 2-conductor wiring is used between DK9-25 and DK9-DSS console. www.hybrex.com.au │...
Each key can be assigned as a Trunk, a Trunk Group, a Station, a Pilot Number, a Speed Dial or a Function. Each DK9 can be assigned to use two groups by refer Mode 41-st-(02 & 03). DSS key position on mode 07 Figure 2-1 DSS Key Position on Mode 07 www.hybrex.com.au │...
M-1 (1~30) and M-2 (31~60) is DSS key position on mode 08 by refer setting at mode 41-{DK9DSS}-02 M-3 (1~30) and M-4 (31~60) is DSS key position on mode 08 by refer setting at mode 41-{DK9DSS}-03 www.hybrex.com.au │...
2.10 Menu Status Description A. Menu status when idle B. Menu status when pressing [CID Log] C. Menu status when pressing [MSG] key www.hybrex.com.au │...
Page 14
D. Menu status when calling (Voice Call) E. Menu status when calling (Ring Call) F. Menu status when dialing to busy Extension/Trunk Note: first two lines will show status of dialed No. www.hybrex.com.au │...
Page 15
G. Menu status when being rung by Trunk/Extension H. Menu status when in conversation with Trunk I. Menu status when pressing [PRG] key www.hybrex.com.au │...
Page 16
J. Menu status when pressing [PRG], [6] to adjust volume K. Menu Status when pressing [Hotel] key www.hybrex.com.au │...
3. HYBREX Digital Telephone DK9-15 3.1 Mechanical Specifications of DK9-15 • Dimension (L x W x H): 295 x 120 x 160 mm • Weight: 950g • Body Material: ABS • Color: Black • Mounting: On Desk • Max / Min. Temperature (operating) : 0º to 45º C •...
CO Line Names • Dialed Telephone Number • Last Number Redial • Menu Keys • Phone / System Setting Values • Speed Dial Directory • Speed Dial Number • Status of Operation/Function • Time • Voice Mail Messages www.hybrex.com.au │...
6. Not used 7. Connects to DK9-DSS 8. Connects to G2-STU2 Note: 1. 4-conductor wiring (with two digital ports) is required for the DK9-15 if DK9- DSS console is connected. 2. 2-conductor wiring is use between DK9-15 and DK9-DSS phone www.hybrex.com.au │...
Each key can be assigned as a Trunk, a Trunk Group, a Station, a Pilot Number, a Speed Dial or a Function. Each DK9-15 can be assigned to use two groups by refer Mode 41-st-(02 & 03). Figure 3-1 DSS Key Position on Mode 07 www.hybrex.com.au │...
M-1 (1~30) and M-2 (31~60) is DSS key position on mode 08 by refer setting at mode 41-{DK9DSS}-02 M-3 (1~30) and M-4 (31~60) is DSS key position on mode 08 by refer setting at mode 41-{DK9DSS}-03 www.hybrex.com.au │...