Powersensor (Option, Refer To Quick Specification Table); Smart Power (Option); Smartresponse; Pixel Orbiting - Philips 241P4QPYKES/00 Service Manual

68 241P4QPYK LCD
B. PerfectTune must be performed after Auto Color.
C. PerfectTune must be conducted through DVI or scaler embedded patterns.
D. Delta E < 2.5
3.17 PowerSensor

3.18 Smart Power (option)

To reduce the power by adjusting backlight, contrast and color.
Algorithm is provided by Supplier.

SmartResponse

3.19
To enhance the Response time when Gary to Gary.
When SmartResponse = 3, Response time = 6 mSec (typ.)

Pixel Orbiting

3.20
For the VA or IPS panels, it design to prevent Image Sticking.

SPEAKER

1) Input signal: 1000 mVrms
Loudspeaker (Impedance: 5.25 [F1] Ohm +/-15%): 1.5W+ 1.5 W (typical) , stereo for
RMS
2) earphone
Stereo, > 50mVrms for headphone of 32 . The loudspeakers are muted when
earphone is plugged in.
4

Visual characteristics

4.1

Test conditions

Unless otherwise specified, this specification is defined in following conditions.
(1) Input signal : As defined in 3.3, 1920 x 1080 non-interlaced mode (1920 x 1080 @60 Hz), signal
sources must have 75 ohm output impedance.
(2) Luminance setting : controls to be set to 300 nits with full screen 100 % duty cycle white signal
General Product Specification
(option, refer to Quick specification table)