Horizontal Scanning; Vertical Scanning; Power Input Connection; Power Management - Philips 248C3LSB/00(AP) Service Manual

54 248C3L LCD
3.4

Horizontal scanning

Sync polarity
Scanning frequency
3.5

Vertical scanning

Sync polarity
Scanning frequency
3.6

Power input connection

Power cord length
Power cord type
3.7

Power management

The monitor must comply with the Microsoft On Now specification, and meet EPA requirements.
Mode
Power-On
Standby (Sleep
mode)
DC Power Off
3.8

VGA Display identification

In accordance with VESA Display Channel Standard Ver.1.0 and DDC 2B capability
3.9

DVI Display identification

In accordance with DVI requirement (DDWG digital Visual Interface revision 1.0)
use DDC-2B, DDC/CI, and EDID V1.3
3.10 USB support
Connect the upstream port of the monitor to host PC's USB port via USB cable. Then attach
external device to the downstream port of the monitor. Check if the device can work properly.

3.11 DDC /CI Support and Smart Manage/Control

In accordance with VESA DDC/CI and MCCS ver.2.0, the monitor should be workable with ,
Philps SmartManage, SmartControl V6.1, and Protrait Display Tune at least.
0.1
2011/05/02
General Product Specification
: Positive or Negative
: 30 – 83 K Hz
: Positive or Negative
: 56 - 76 Hz
:please refer to M3 cable bundle summary file
: 3 leads power cord with protective earth plug.
HSYN
VSYNC
C
On On
Off Off Blanked
(option , refer to Quick specification table)
248C3
PHILIPS
Video Pwr-cons.
<24W (typ.)
Active < 30W(max.)
EPA5.0< 20W
0.3W (typ.)
N/A 0.3W (typ.)
Indication
White LED
Blinking white LED
Period 1sec on, 3sec off
LED Off
23.6" Wide 16:9 LCD Monitor
10 of 18
Rec. time
--
< 3 s