Display Port; Usb Support ( Option , Refer To Quick Specification Table ); Ddc /Ci Support And Smartcontrol; Pivot Function ( Option , Refer To Quick Specification Table ) - Philips 19B4LPCS/00 Service Manual

3.10 Display Port

3.11 USB support
(option, refer to Quick specification table)
Connect the upstream port of the monitor to host PC's USB port via USB cable. Then attach external
device to the downstream port of the monitor. Check if the device can work properly.

3.12 DDC /CI Support and SmartControl

In accordance with VESA DDC/CI, the monitor should be workable with Philips SmartControl and
Portrait Display Tune at least.
3.13 Pivot function
It needs to support AUTO PIVOT function with SmartControl PC application tool.
3.14 Hot-key definition

3.15 Smart Image

3.16 PerfectTune II
A. PerfectTune must be done after warming 30 minutes at least.
B. PerfectTune must be performed after Auto Color.
C. PerfectTune must be conducted through DVI or scalar embedded patterns.
D. Delta E < 2.5
3.17 PowerSensor
(option, refer to Quick specification table)

3.18 Smart Power (option)

Reduce the power by adjusting backlight, contrast and color.
Algorithm is provided by Supplier.
3.19 SmartResponse
To enhance the Response time when Gary to Gary.
When SmartResponse= on, Response time = 2 mSec (typ.)
OD will only work after 3 frames pass to pretend user see side effect.
When smart Image set to off and color temp set to User define, OD function will work immediately.
0.1
2011/11/10
(option, refer to Quick specification table)

(refer to M4 OSD button definition)

(formerly FGA, FACTORY GAMMA Alignment)
(not required for M4 models)
M4 19S4 / 19B4
PHILIPS
19B4LP LCD
19" 5:4 LCD Monitor
69 of 18
69