Horizontal Scanning; Vertical Scanning; Power Input Connection; Power Management - Philips 228C3LHSB Service Manual

3.4

Horizontal scanning

Sync polarity
Scanning frequency
3.5

Vertical scanning

Sync polarity
Scanning frequency
3.6

Power input connection

Power cord length
Power cord type
3.7

Power management

The monitor must comply with the Microsoft On Now specification, and meet EPA requirements.
Mode
Power-On
Standby (Sleep
mode)
DC Power Off
3.8

VGA Display identification

In accordance with VESA Display Channel Standard Ver.1.0 and DDC 2B capability
3.9

DVI Display identification

In accordance with DVI requirement (DDWG digital Visual Interface revision 1.0)
use DDC-2B, DDC/CI, and EDID V1.3
3.10 USB support
(option , refer to Quick specification table)
Connect the upstream port of the monitor to host PC's USB port via USB cable. Then attach
external device to the downstream port of the monitor. Check if the device can work properly.

3.11 DDC /CI Support and Smart Manage/Control

In accordance with VESA DDC/CI and MCCS ver.2.0, the monitor should be workable with ,
Philps SmartManage, SmartControl V6.1, and Protrait Display Tune at least.
0.1
2011/05/23
General Product Specification
: Positive or Negative
: 30 – 83 K Hz
: Positive or Negative
: 56 - 76 Hz
:please refer to M3 cable bundle summary file
: 3 leads power cord with protective earth plug.
HSYN
VSYNC Video
C
On On Active
Off Off Blanked
N/A
228C3
PHILIPS
Pwr-cons.
<24W (typ.)
< 30W(max.)
EPA5.0< 20W
Blinking white LED
0.3W (typ.)
Period 1sec on, 3sec off
< 0.3W
21.5" Wide 16:9 LCD Monitor
228C3LH LCD
Indication Rec. time
White LED
< 3 s
LED Off
11 of 18
61
--