Table of Contents
Advertisement
Detergents can only be applied at low
pressure setting (Mix).
STEP 1:
Install the Vario Power Spray Wand.
Set the spray wand to the low pres-
sure setting (Mix).
STEP 2:
Fill the detergent tank with Karcher
detergent and position the tank into
its storage area. Insert the suction
tube with filter into the tank and close
it with the cap.
STEP 3:
Adjust the suction volume of the de-
tergent solution by means of the dos-
age regulator for detergents.
STEP 4:
Turn on the pressure washer (I). Pull
trigger to operate unit. Liquid deter-
gent is drawn into the unit and mixed
with water. Apply detergent to work
area. Do not allow detergent to dry
on surface.
STEP 5:
To rinse, move the VPS out of "Mix"
position and pull trigger to operate
unit.
STEP 6:
Cleaning up: Always draw fresh wa-
ter through the detergent tank or si-
phon tube when done to flush any
remaining detergents from the injec-
tion system.
English 11
Advertisement
Table of Contents
