T2 units for synchronized 4K playback. Introduction Tools Used The Grass Valley, a Belden Brand, T2 iDDR has two independent, Full HD output channels that can be used for multiscreen events, digital • Multiple T2 units signage and projection mapping when playback is synchronized.
Page 3
APPLICATION NOTE PREPARING TWO T2 IDDRS FOR SYNCHRONIZED 4K PLAYBACK T2 Settings • The following process uses Front Panel mode • These settings should be applied to ALL syn- chronized T2 units 1. Set Reference ( common to GPI and RS-422 synchronization) Tap [Config] >...
Page 4
APPLICATION NOTE PREPARING TWO T2 IDDRS FOR SYNCHRONIZED 4K PLAYBACK 4. Set GPI Input (GPI only) Tap [Config] > [GPI] > [Input] tabs. • PLAY both P1 and P2 with GPI Input 1 Set [GPI-Input 1], check [P1] and [P2] in the Channel section.
1. Import and mount clips on P1 and P2 in each T2 unit (common to GPI and RS-422 synchronization) • Do not use [Sync mode] on P2 • Recommended media format is Grass Valley HQ, approx. 150 Mb/s Projector RS422(BVW)
Page 6
United States and other jurisdictions. Grass Valley and EDIUS are trademarks or registered WWW.GRASSVALLEY.COM trademarks of Grass Valley. Belden Inc., Grass Valley and other parties may also have trademark rights in other terms used herein.