Table of Contents
Advertisement
Quick Links
Model No. PETL59815.1
Serial No.
Write the serial number in the space
above for reference.
Serial
Number
Decal
CUSTOMER SERVICE
UNITED KINGDOM
Call: 0330 123 1045
From Ireland: 053 92 36102
Website: www.iconsupport.eu
E-mail: csuk@iconeurope.com
Write:
ICON Health & Fitness, Ltd.
Unit 1D, The Gateway
Fryers Way, Silkwood Park
OSSETT
WF5 9TJ
UNITED KINGDOM
AUSTRALIA
Call: 1800 993 770
E-mail: australiacc@iconfitness.com
Write:
ICON Health & Fitness
PO Box 635
WINSTON HILLS NSW 2153
AUSTRALIA
CAUTION
Read all precautions and instruc-
tions in this manual before using
this equipment. Save this manual
for future reference.
USER'S MANUAL
www.iconeurope.com
Advertisement
Table of Contents
Related Manuals for Pro-Form 5.0 ZLT PETL59815.1
Summary of Contents for Pro-Form 5.0 ZLT PETL59815.1
- Page 1 Model No. PETL59815.1 Serial No. USER’S MANUAL Write the serial number in the space above for reference. Serial Number Decal CUSTOMER SERVICE UNITED KINGDOM Call: 0330 123 1045 From Ireland: 053 92 36102 Website: www.iconsupport.eu E-mail: csuk@iconeurope.com Write: ICON Health & Fitness, Ltd. Unit 1D, The Gateway Fryers Way, Silkwood Park OSSETT...
-
Page 2: Table Of Contents
TABLE OF CONTENTS WARNING DECAL PLACEMENT ............. . .2 IMPORTANT PRECAUTIONS . -
Page 3: Important Precautions
IMPORTANT PRECAUTIONS WARNING: To reduce the risk of burns, fire, electric shock, or injury to persons, read all important precautions and instructions in this manual and all warnings on the treadmill before using the treadmill. ICON assumes no responsibility for personal injury or property damage sustained by or through the use of this product. - Page 4 22. Never leave the treadmill unattended while 26. Never insert any object into any opening on it is running. Always remove the key, press the treadmill. the power switch into the off position (see the drawing on page 5 for the location of the 27.
-
Page 5: Before You Begin
BEFORE YOU BEGIN Thank you for selecting the new PROFORM 5.0 ZLT reading this manual, please see the front cover of this ® treadmill. The 5.0 ZLT treadmill offers a selection of fea- manual. To help us assist you, note the product model tures designed to make your workouts at home more number and serial number before contacting us. -
Page 6: Part Identification Chart
PART IDENTIFICATION CHART Use the drawings below to identify small parts used for assembly. The number in parentheses below each draw- ing is the key number of the part, from the PART LIST near the end of this manual. The number following the key number is the quantity used for assembly. -
Page 7: Assembly
ASSEMBLY • Assembly requires two persons. • Left parts are marked “L” or “Left” and right parts are marked “R” or “Right.” • Place all parts in a cleared area and remove the packing materials. Do not dispose of the packing •... - Page 8 3. Tighten an M10 x 60mm Screw (1) and an M10 x 20mm Screw (4) into the Base (36) and into the Right Upright (102) as shown; do not fully tighten the Screws yet. Repeat this step on the left side of the tread- mill.
- Page 9 5. Tighten an M10 x 70mm Screw (2) with an M10 Star Washer (27) into the bottom of each Handrail (69) as shown; firmly tighten the Screws. 6. Slide the Right Inner Upright Cap (105) between the Right Upright (102) and the Motor Hood (56). Press the Right Outer Upright Cap (106) against the Right Inner Upright Cap until they snap together.
- Page 10 7. Raise the Frame (50) to the upright position. Have a second person hold the Frame until step 8 is completed. Remove the M8 Nut (39) and the M8 x 32mm Bolt (7) from the bracket on the Base (36). Next, orient the Storage Latch (42) as shown.
-
Page 11: How To Use The Treadmill
HOW TO USE THE TREADMILL HOW TO PLUG IN THE POWER CORD Follow the steps below to plug in the power cord. This product must be earthed. If it should malfunc- 1. Plug the indicated end of the power cord into the tion or break down, earthing provides a path of least socket on the treadmill. - Page 12 CONSOLE DIAGRAM FEATURES OF THE CONSOLE To turn on the power, see page 13. To use the man- ual mode, see page 13. To use a preset workout, see The treadmill console offers a selection of features page 15. To use the information mode, see page 16. To use the sound system, see page 16.
- Page 13 HOW TO TURN ON THE POWER HOW TO USE THE MANUAL MODE IMPORTANT: If the treadmill has been exposed to 1. Insert the key into the console. cold temperatures, allow it to warm to room tem- perature before you turn on the power. If you do See HOW TO TURN ON THE POWER at the left.
- Page 14 4. Change the incline of the treadmill as desired. The lower right corner of the display will show To change the incline of the treadmill, press the the approximate num- Incline increase and decrease buttons or one of ber of calories you have the numbered Quick Incline buttons.
- Page 15 HOW TO USE A PRESET WORKOUT At the end of each segment, a series of tones will sound and the next segment of the profile will begin 1. Insert the key into the console. to flash. If a different speed and/or incline setting is programmed for the next segment, the speed and/ See HOW TO TURN ON THE POWER on page 13.
- Page 16 THE INFORMATION MODE HOW TO USE THE SOUND SYSTEM The console features an information mode that keeps To play music or audio books through the console track of treadmill usage information. The information sound system while you exercise, plug a 3.5 mm male mode also allows you to select miles or kilometers as to 3.5 mm male audio cable (not included) into the jack the unit of measurement.
-
Page 17: How To Fold And Move The Treadmill
HOW TO FOLD AND MOVE THE TREADMILL HOW TO FOLD THE TREADMILL HOW TO MOVE THE TREADMILL Before folding the treadmill, remove the key and Before moving the treadmill, fold it as described at the unplug the power cord. CAUTION: You must be left. -
Page 18: Maintenance And Troubleshooting
MAINTENANCE AND TROUBLESHOOTING MAINTENANCE SYMPTOM: The power turns off during use Regularly clean the treadmill and keep the walking a. Check the power switch (see drawing c at the left). belt clean and dry. First, press the power switch into If the switch has tripped, wait for five minutes and the off position and unplug the power cord. - Page 19 SYMPTOM: The walking belt slows when walked on Remove the five indicated M4.2 x 19mm Washer Head Screws (9). Then, carefully remove the Motor Hood (56). a. If an extension cord is needed, use only a 3-con- ductor, 14-gauge (1 mm ) cord that is no longer than 5 ft.
- Page 20 SYMPTOM: The walking belt is off-center. SYMPTOM: The walking belt slips when walked on IMPORTANT: The walking belt should be centered between the foot rails. If the walking belt rubs a. First, remove the key and UNPLUG THE POWER against the foot rails, the walking belt may become CORD.
-
Page 21: Exercise Guidelines
EXERCISE GUIDELINES Burning Fat—To burn fat effectively, you must exer- WARNING: cise at a low intensity level for a sustained period of Before beginning this time. During the first few minutes of exercise, your or any exercise program, consult your physi- body uses carbohydrate calories for energy. -
Page 22: Part List
PART LIST Model No. PETL59815.1 R0115A Key No. Qty. Description Key No. Qty. Description M10 x 60mm Screw Right Idler Roller Bracket M10 x 70mm Screw Right Rear Foot M4.2 x 19mm Screw Left Rear Foot M10 x 20mm Screw Idler Roller M4.2 x 13mm Washer Head Screw Left Idler Roller Bracket... - Page 23 Key No. Qty. Description Key No. Qty. Description Power Cord Grommet Right Outer Upright Cap Right Upright Caution Decal Left Outer Upright Cap M8 Weld Nut Left Inner Upright Cap – User’s Manual Right Inner Upright Cap Note: Specifications are subject to change without notice. For information about ordering replacement parts, see the back cover of this manual.
-
Page 24: Exploded Drawing
EXPLODED DRAWING A Model No. PETL59815.1 R0115A... - Page 25 EXPLODED DRAWING B Model No. PETL59815.1 R0115A 23 11...
- Page 26 EXPLODED DRAWING C Model No. PETL59815.1 R0115A...
- Page 27 EXPLODED DRAWING D Model No. PETL59815.1 R0115A...
-
Page 28: Ordering Replacement Parts
ORDERING REPLACEMENT PARTS To order replacement parts, please see the front cover of this manual. To help us assist you, be prepared to provide the following information when contacting us: • the model number and serial number of the product (see the front cover of this manual) •...