Advertisement
Installation of Danfoss Link™ HR
Installation of Danfoss Link™ HR
1. Danfoss Link™ HR is to be mounted into a build in box in
the wall.
It is recommended not to install the HR in a metal box due
to the possible disturbance of the radio communication.
2. Connect the Danfoss Link™ HR according to the
connection diagram.
Configuration:
See Step-by-Step guide in Danfoss Link™ CC instruction
manual.
To install the device or perform a link test press one of the
installation buttons until the LED gives a fast green flash.
4
L
N
Advertisement
Need help?
Do you have a question about the Link HR and is the answer not in the manual?
Questions and answers