Preparation; Status Display Of Disc - Orion TELETEXT 14LD Operating Instructions Manual

PREPARATION/STATUS DISPLAY OF DISC
The following pages describe the
setup/operation in DVD mode.
NOTE:
If the unit does not operate properly:
Static electricity can adversely affect the
operation of this player. Sometimes this
can be remedied by unplugging the unit
for a short time, then reconnecting it.

Preparation

Before DVD/CD operation, please make preparations as follows.
1
Insert the AC cord plug into a standard 240V 50Hz AC outlet.
• If the AC cord plug is plugged in for the first time, wait for
about 5 seconds before pressing POWER (ON) on the
front.
NOTE: When connecting to other equipment, unplug the unit
from the AC outlet.
2
Press Sub Power ( ) on the unit or on the remote control to
turn on the unit.
• Every time you press Sub Power ( ), the unit starts from
TV mode.
• When using an amplifier, switch on the amplifier.
3
Press TV/DVD to select DVD
mode.
The DVD startup screen will ap-
pear on the screen.

Status display of disc

Press DISPLAY twice. The status display of the disc will appear
on the screen during playback.
DVD
Chapter number
Title number
Disc operation
Title 1/99 Chapter 1/999
Audio language
1/8 Eng Dolby Digital
1/32 Eng
Subtitle language
To make status display disappear, press DISPLAY again.
Audio CD
Disc operation
Track 11/99
Track number
• When you play the CD disc, the status display will appear on
the screen and continue displaying.
No Disc
Title elapsed playing time
00:34:56 01:12:33 Title total time
Camera angle
1/9
Type of audio
Track elapsed playing time
34:56 71:33
Track total time
25