Setting Setup language for DVD
Playback
J5N70307A
K
1
Press TV/DVD to select DVD mode.
2
Press SETUP in the stop mode. Press
"Other", then press
then press
or ENTER.
3
Press
or
to select desired language,
then press ENTER.
4
Press SETUP until normal
TV screen appears.
1
Press TV/DVD to select DVD mode.
2
Place the disc in the disc slot with the label
side facing forward. (If the disc has a label.)
Hold the disc without touching either of its
surfaces, align it with the guides, and place it
in position.
3
The menu of DVD will be read automatically. It takes a few seconds.
4
Depending on the DVD, the start-up sequence will vary. Some DVDs indicate a
menu screen. Press
to confirm the selection.
5
Press STOP to end playback - the unit will remember this point on the disc if
you resume playback. However if you press stop again, the unit will clear the
stopped point.
to select
to select "OSD Language",
/
or
/
to select the menu. Then press ENTER
4
Language Picture
Sound
Parental Other
OSD Language English
/Enter/Setup/Return
Language Picture
Sound
Parental Other
OSD Language English
English
Francais
Espanol
Deutsch
Italiano
/Enter/Setup/Return