Orion TELETEXT 14LD Operating Instructions Manual page 15

PRESETTING THE CHANNELS
MANUAL TUNING
How to tune a station to channel 10 position.
1
Press MENU.
Press or to select the
CH TUNING mode, then press
ENTER.
2
Press or to select the
MANUAL mode, then press
ENTER.
3
Press or to select PAL or
SECAM-L. Then press ENTER.
4
Press or until the picture
appears on screen. If this is not
your desired channel, press
or until your desired channel
appears.
If you need to make the picture
clearer, use or
TUNING).
Then press ENTER.
5
Press or to select channel
position No.10, then press
ENTER.
6
Repeat steps 3 through 5 until all the required channels
have been stored.
7
When all desired channels have been set in your required
position, press MENU three times to return to normal TV
screen.
MENU
ON/OFF TIMER
CH TUNING
PICTURE
AUDIO
NICAM AUTO OFF
AV COLOUR AUTO
LANGUAGE LANGUAGE
PRESS: ▲ / ▼ / ENTER / MENU
CH TUNING
MANUAL
AUTO
CH ALLOCATION
PRESS: ▲ / ▼ / ENTER / MENU
CH 1
PAL
PRESS: B / A/ENTER/MENU
CH 1
PAL
SEARCH:BA/F.TUNE:CD/ENTER/MENU
(FINE
CH 10
PAL
PRESS: ▲ / ▼ / ENTER / MENU
13