Power Source - Orion TELETEXT 14LD Operating Instructions Manual

TO USE AC POWER
1. Connect the AC mains lead to the AC adaptor.
2. Connect the AC adaptor plug into this unit's DC input socket.
3. Connect the AC mains lead into an AC socket.
4. The Standby indicator will light.
NOTES:
• Please make sure to insert the plug of each cord securely.
• During use the AC adaptor becomes warm. This is not a malfunction.
WARNING:
• DO NOT CONNECT THIS UNIT TO THE POWER USING ANY DEVICE OTHER THAN THE SUPPLIED AC
ADAPTOR OR POWER LEAD. THIS COULD CAUSE FIRE, ELECTRICAL SHOCK, OR DAMAGE.
• DO NOT USE WITH A VOLTAGE OTHER THAN THE POWER VOLTAGE DISPLAYED. THIS COULD CAUSE
FIRE, ELECTRICAL SHOCK, OR DAMAGE.
CAUTION:
• DO NOT USE THE AC ADAPTOR IF IT IS COVERED BY A CLOTH ETC., OR PRESSED INTO A NARROW
AREA. THIS RESULTS IN POOR DISSIPATION OF HEAT AND MAY CAUSE FIRE, ELECTRICAL SHOCK, OR
DAMAGE.
• WHEN THIS UNIT IS NOT USED FOR A LONG TIME, (E.G., AWAY ON A TRIP) IN THE INTEREST OF SAFETY,
BE SURE TO UNPLUG IT FROM THE AC SOCKET.
• DO NOT PLUG/UNPLUG THE PLUG WHEN YOUR HANDS ARE WET. THIS MAY CAUSE ELECTRICAL
SHOCK.
• IF YOU NEED TO REPLACE THE SUPPLIED AC ADAPTOR OR AC LEAD, THE SPECIFIED ONE IS RECOM-
MENDED. IN THIS CASE, CONTACT THE DEALER THAT YOU PURCHASED THE UNIT FROM.

POWER SOURCE

AC 240V, 50Hz
AC mains lead (supplied)
AC adaptor
(supplied)
7