ViewSonic PLED-W500 User Manual page 49

Use "Clock" to make an adjustment. Refer to the "SETTING | Signal" section
for more information.
compatible with the product.
Image is out of focus
Make sure the lens cap is removed.
Adjust the "Focus Ring" on the projector lens.
Make sure the projection screen is within the required distance of 1.71-9.84
feet (0.52-3.00 meters) from the projector.
The image is stretched when displaying 16:9 DVD title
When you play anamorphic DVD or 16:9 DVD, the projector will show the best
image in 16: 9 format on projector side.
If you play 4:3 format DVD title, please change the format as 4:3 in projector
OSD.
If the image is still stretched, you will also need to setup the display format
as 16:9 (wide) aspect ratio type on your DVD player.
Image is too small or too large
Move the projector closer to or further from the screen.
Press "Menu" on the remote control or on the control panel. Go to "SCREEN"
--> "Aspect Ratio"and try the different settings.
Image has slanted sides:
If possible, reposition the projector so that it is centered on the screen and
below the bottom of the screen.
Use "SCREEN" --> "V Keystone" from the OSD to make an adjustment.
Image is reversed
If the projector is mounted on the ceiling, select "SCREEN" --> "Auto Ceil
Mount" from the OSD and adjust the projection direction.
If the projector is placed on the desk, select "SETTING" --> "Orientation"
from the OSD and adjust the projection direction.
Downloaded From projector-manual.com Viewsonic Manuals
48