Table of Contents
Advertisement
Setup
Note: The default PIN code of this receiver is 0000.
Auto Scan:
On the "Setup" menu, highlight "Auto Scan" and press ENTER to start channel search.
Once a digital TV/Radio channel is found, the channel number and the programme name will be
displayed.
"Scan Complete" shows after scanning is finished.
Manual Scan:
If you know the frequency of a local broadcaster you can conduct a Manual Scan. Input the
Channel No. and Frequency, and select Start Scan to scan a specific channel.
"Scan Complete" shows after scanning is finished.
Note: These parameters vary between different regions. Please refer to the details provided by
your local broadcast service.
- 30 -
© 2010 Uniden Australia Pty Ltd/Uniden New Zealand Ltd.
Advertisement
Table of Contents
