Table of Contents
Advertisement
Switching on for the First Time
Your HD9000UPVR needs to be tuned to channels in your region. When it is connected and
switched on for the first time the HD9000UPVR will start in Quick Scan mode.
1. Turn on your TV set.
2. Turn on the HD9000UPVR by pressing the power key on the front panel or pressing
STANDBY on the remote control. The green ON LED will light up.
3. The "Quick Scan" menu will appear. Use the directional keys
remote control to highlight your region and then press ENTER to automatically scan and
place into memory all services transmitted in your region.
4.
When the receiver states "Scan Complete" press EXIT.
5.
Digital television programmes are then received.
If Quick Scan does not automatically appear, press MENU then use directional keys
NOTE
,
,
ENTER. Then follow from step 3 above.
- 12 -
and
to navigate to "Setup" and highlight "Quick Scan" and press
© 2010 Uniden Australia Pty Ltd/Uniden New Zealand Ltd.
,
,
and
on the
Advertisement
Table of Contents
