Table of Contents
Advertisement
en
Filters
The filters 1J keep large foreign
objects in the rinsing water away from
the pump. These foreign objects may
occasionally block the filters.
– After each wash cycle check the filters
for residue and clean if required.
– After unscrewing the coarse microfilter,
you can take out the filter group.
&RDUVH PLFURILOWHU
– Remove any residue and clean filters
under running water.
– Re-install filter system in reverse
sequence and ensure that the arrow
marks are opposite each other after
closing the filter system.
18
Downloaded from DishWasher-Manual.com Manuals
Spray arms
Limescale and contaminants in the rinsing
water may block nozzles
and bearings on the spray arms 12
and 1:.
– Check outlet nozzles on the spray
arms for blockages.
– Unscrew the upper spray arm 12.
– Remove the lower spray arm 1:
upwards.
– Clean spray arms under running water.
– Re-engage or screw on spray arms.
Advertisement
Table of Contents
