Speed Adjustment Knob; Keypad; Horn Button; Menu Button - Quantum q-logic 2 Operation Instructions Manual

10
NOTE: The lock-out feature is not programmed at the factory. To have this feature added, contact
your Quantum Rehab Provider.
To lock the controller:
1. Power the controller on.
2. Push and hold the On/Off and Mode Select Lever in the on position until the controller turns off. The
controller is now locked.
To unlock the controller:
1. Turn the controller on. The words "System Lock" will appear on the display screen.
2. Move the joystick to the full forward position until you hear a beep.
3. Move the joystick to the full reverse position until you hear a beep.
4. Release the joystick. The controller is now unlocked.

Speed Adjustment Knob

The speed adjustment knob is used to control the speed of the power chair.
To change the speed:
1. Push the on/off button and Mode Select Lever up once to power on the chair and the controller.
2. To increase your speed, press the speed adjustment knob up.
3. To decrease your speed, press the speed adjustment knob down.

Keypad

The keypad is located directly in front of the joystick. It contains keys that you will use to control your
power chair.

Horn Button

The horn button activates a warning horn.

Menu Button

The menu button is used to access user accessibility features such as trip odometer reset and time set.
Key 1 and Key 2 Select Buttons
The key 1 select button is used to quickly and easily select drive profile 1. The key 2 select button selects
the seat. Contact your Quantum Rehab Provider with any questions.
NOTE: If you Q-Logic 2 Controller is equipped with a lighting system, the menu button and key
1/key 2 select button will be replaced with a light button and left/right turn indicator buttons.

Light Button

The light button controls the front headlights and rear running lights.
To operate the lights:
1. Push the On/Off and Mode Select Lever up once to power on the chair and the controller.
2. Press the light button once to activate the front headlights and rear running lights.
3. Press the light button again to turn off the lighting system.
Left/Right Turn Indicator Buttons
The left/right turn indicator buttons toggle either the left or right turn indicators.