Yamaha F100D Owner's Manual page 27

3
6 7
1. Tachometer
2. Trim meter
3. Multifunction display
4. Water detection warning indicator
5. Engine trouble warning/maintenance indica-
tor
6. Cooling water pressure
7. Oil pressure (4-stroke models)
8. Cooling water/engine temperature
9. Battery voltage
NOTE:
The tachometer unit shows various kinds of
information according to the setting made us-
ing the " " (set) and "
For details, see the attached operation manu-
al.
Preoperation checks
Place the gear shift lever in neutral and turn
the main switch to "
plays come on and the total hour display
comes on, the gauge will change to normal
operation. If the buzzer sounds and the water
separator warning indicator blinks, consult
your Yamaha dealer immediately.
NOTE:
To stop the buzzer, press the "
" " (mode) button.
1 4 5 2
8 9
ZMU05418
" (mode) buttons.
" (on). After all the dis-
" (set) or
Basic components
Low oil pressure warning
When the engine oil pressure drops too low,
the low oil pressure warning indicator will start
to blink, and the engine speed will automati-
cally decrease to about 2000 r/min.
Stop the engine immediately if the buzzer
sounds and the low oil pressure warning indi-
cator blinks. Check the engine oil quantity and
replenish oil if necessary. If the warning de-
vice has activated while the appropriate en-
gine oil quantity is maintained, consult your
Yamaha dealer.
ECM01600
CAUTION:
Do not continue to run the engine if the
low oil pressure warning device has acti-
vated. Serious engine damage will occur.
ZMU05430
ZMU05431
21