Original Operating Manual - Festool TPE-RS 100 Q Original Operating Manual

Original operating manual

1 Symbols
Warning of general danger
Risk of electric shock
Read the Operating Instructions/Notes!
Wear ear protection.
Wear a dust mask.
Wear protective goggles.
Do not throw in the household waste.
The specified illustrations appear at the beginning
of the Operating Instructions.
2 Technical data
Carpet remover
Power
Speed (no load) n
0
Working strokes
Stroke
Weight
Safety class
3 Intended use
The power tool has been designed to peel wall-to-
wall carpeting from floors and to remove fabric
bases, compact-foam foundation bases and to re-
move textile wall coverings and adhesive residues.
The user is liable for improper or non-in-
tended use.
4 Safety instructions
4.1 General safety instructions
General safety instructionsWARNING! Read
all safety warnings and all instructions.
Failure to follow the warnings and instructions may
result in electric shock, fire and/or serious injury.
Save all warnings and instructions for future ref-
erence.
The term "power tool" in the warnings refers to
your mains-operated (corded) power tool or bat-
tery-operated (cordless) power tool.
– Wear suitable protection: such as ear protec-
tion, safety goggles, a dust mask for work which
generates dust, and protective gloves when
working with raw materials and when changing
tools.
4.2
Levels determined in accordance with EN 60745 are
typically:
Sound pressure level
Noise level
Measuring uncertainty allowance
Operating noise
Damage to hearing

Use ear protection!
Vibration emission value a
directions) and uncertainty K measured in accor-
TPE-RS 100 Q
dance with EN 60745:
620 W
Vibration emission level
6000 rpm
(3 directions)
12000 rpm
The specified emissions values (vibration, noise)
5 mm
– are used to compare machines.
– They are also used for making preliminary esti-
3.6 kg
mates regarding vibration and noise loads during
/II
operation.
– They represent the primary applications of the
power tool.
Increase possible for other applications, with other
insertion tools or if not maintained adequately. Take
note of idling and downtimes of machine!
4.3
cuit-breaker (FIG, PRCD).
– Connect the machine to a suitable dust extractor.
– Regularly remove dust deposits in the motor
housing.
Emission levels
CAUTION
h
Metal processing
When processing metal, the following mea-
sures must be taken for safety reasons:
–Install an upstream residual-current cir-
Wear protective goggles.
TPE-RS 100 Q
GB
L = 76 dB(A)
PA
L = 87 dB(A)
WA
K = 3 dB
(vector sum for three
2
a = 7.0 m/s
h
2
K = 3.0 m/s
9