Yamaha BIG BEAR YFM400FPP Owner's Manual page 268

1. Clamp
1. Bride
1. Mordaza
1. Drain bolt (engine oil)
3. Compression spring
1. Boulon de vidange (huile de moteur)
3. Ressort de compression
1. Perno de drenaje (aceite del motor)
3. Muelle de compresión
2. O-ring
4. Oil strainer
2. Joint torique
4. Crépine à huile
2. Junta tórica
4. Colador de aceite
8-15
Engine oil replacement and oil filter cleaning
1. Place the machine on a level place.
2. Warm up the engine for several minutes and
stop it.
3. Place a container under the engine to collect
the used oil.
4. Remove the clamp.
5. Remove the oil filler cap and drain bolt to
drain the oil.
CAUTION:
_
When removing the drain bolt, the compres-
sion spring, oil strainer and O-ring will fall out.
Take care not to lose these parts.
_