Procedure For Tilting Down - Yamaha F4 Owner's Manual

1. Neutral position
3. To prevent steering movement, turn the
steering friction adjuster clockwise.
1. Steering friction adjuster
4. Close the air vent valve.
1
1. Air vent valve
5. Disconnect the fuel hose from the fuel
joint on the outboard motor, and then in-
stall the fuel joint cap. WARNING! When
not using a portable fuel tank, make
1
ZMU06749
1
ZMU06827
1
ZMU07627
sure to install the fuel joint cap. Other-
wise, injury could result from striking
the fuel joint accidentally.
1. Fuel hose
2. Fuel joint cap
6. Hold the rear of the top cowling and fully
tilt the outboard motor up. Slightly lower
the outboard motor from the fully tilted
up position and fit the tilt support bar se-
curely into the holder located on the
clamp bracket.
1
2
1. Tilt support bar
2. Holder
EMU39572

Procedure for tilting down

1. Slightly tilt the outboard motor up.
2. Slowly tilt the outboard motor down
while pulling the tilt support bar up.
Operation
[EWM02412]
1
2
ZMU06753
ZMU06829
49