Engine Shut-Off Cord (Lanyard); Engine Oil - Yamaha F4 Owner's Manual

Operation
 Check the shift link and start-in-gear pro-
tection cable for loose or damaged con-
nections.
EMU36484

Engine shut-off cord (lanyard)

Inspect the engine shut-off cord and clip for
damage, such as cuts, breaks, and wear.
1. Clip
2. Engine shut-off cord (lanyard)
34
ZMU06852
ZMU06874
1
2
ZMU06873
EMU39385

Engine oil

1. Place the outboard motor in an upright
position (not tilted). NOTICE: If the mo-
tor is not level, the oil level indicated
on the dipstick may not be accurate.
[ECM01791]
2. Remove the top cowling.
3. Remove the oil filler cap and wipe the at-
tached oil dipstick clean.
1
1. Oil filler cap
2. Oil lubrication check window
TIP:
The oil lubrication check window does not in-
dicate the engine oil level. Use the oil lubrica-
tion check window to make sure that the
engine is being lubricated with oil while it is
running.
4. Install the oil filler cap and tighten it com-
pletely.
5. Remove the oil filler cap again and check
that the oil level on the dipstick is be-
tween the upper and lower marks. If the
oil level is not at the proper level, add or
extract oil until the oil is between the up-
per and lower marks.
2
ZMU06769