Stopping Engine; Procedure - Yamaha 20D Owner's Manual

3. Move the gear shift lever quickly and
firmly from neutral to reverse.
Remote control models
1. Check that the tilt lock lever is in the lock
position.
2. Pull up the neutral interlock trigger (if
equipped) and move the remote control
lever quickly and firmly from neutral to
reverse.
ZMU03719
R
N
ZMU03720
ZMU03721
EMU27820

Stopping engine

Before stopping the engine, first let it cool off
for a few minutes at idle or low speed. Stop-
ping the engine immediately after operating
at high speed is not recommended.
EMU27844

Procedure

1. Push and hold the engine stop button or
turn the main switch to "
2. After stopping the engine, disconnect
Operation
" (off).
ZMU03690
32