Tilt Lock Mechanism; Tilt Support Bar; Top Cowling Lock Lever(S) (Turn Type); 2-Pin Connector - Yamaha 20D Owner's Manual

EMU30530

Tilt lock mechanism

The tilt lock mechanism is used to prevent
the outboard motor from lifting out of the wa-
ter when in reverse gear.
1
1. Tilt lock lever
To lock it, set the tilt lock lever in the lock po-
sition. To release, push the tilt lock lever in
the release position.
EMU26330

Tilt support bar

The tilt support bar keeps the outboard motor
in the tilted up position.
ZMU03694
EMU26372

Top cowling lock lever(s) (turn type)

To remove the engine top cowling, turn the
lock lever(s) and lift off the cowling. When in-
stalling the cowling, check to be sure it fits
properly in the rubber seal. Then lock the
cowling again by returning the lever(s) to the
lock position.
ZMU03695
1. Top cowling lock lever(s)
EMU26410

2-pin connector

AC 12 V-40/60/80W power is delivered
through this connector. When using it, keep
in mind the following points:
Basic components
1
ZMU03699
ZMU03701
14