Procedure For Tilting Up (Power Tilt Models) - Yamaha F8C Owner's Manual

Operation
2. Disconnect the fuel line from the out-
board motor.
3. Place the tilt lock lever (if equipped) in the
release/up position.
4. Pull up the shallow water lever (if
equipped).
5. Hold the rear of the top cowling with one
hand and tilt the engine up fully.
6. Push the tilt support knob into the clamp
bracket. Or the tilt support bar will turn to
the lock position automatically. NOTICE:
48
Do not use the tilt support lever or
knob when trailering the boat. The
outboard motor could shake loose
from the tilt support and fall. If the mo-
tor cannot be trailered in the normal
running position, use an additional
support device to secure it in the tilt
position. For more detailed informa-
tion, see page 53.
EMU44610
Procedure for tilting up (power tilt
models)
1. Place the remote control lever in neutral.
2. Press the power tilt switch "
the outboard motor has tilted up com-
pletely.
[ECM01642]
" (up) until