Power Tilt Switch; Steering Friction Adjuster; Trim Rod (Tilt Pin); Tilt Lock Mechanism - Yamaha F8C Owner's Manual

EMU26103

Power tilt switch

The power tilt system adjusts the outboard
motor angle in relation to the transom. Push-
ing the switch " " (up) tilts the outboard mo-
tor up. Pressing the switch "
the outboard motor down. When the switch is
released, the outboard motor will stop in its
current position.
TIP:
For instructions on using the power tilt
switch, see pages 44 and 47.
EMU26123

Steering friction adjuster

A friction device provides adjustable resis-
tance to the steering mechanism, and can be
set according to operator preference. An ad-
justing screw or bolt is located on the swivel
bracket.
To increase resistance, turn the adjuster
clockwise.
To decrease resistance, turn the adjuster
counterclockwise.
EWM00041
" (down) tilts
Do not overtighten the friction adjuster. If
there is too much resistance, it could be
difficult to steer, which could result in an
accident.
EMU26263

Trim rod (tilt pin)

The position of the trim rod determines the
minimum trim angle of the outboard motor in
relation to the transom.
EMU30531

Tilt lock mechanism

The tilt lock mechanism is used to prevent the
outboard motor from lifting out of the water
when in reverse gear.
Components
WARNING
23