Procedure For Tilting Up (Manual Tilt Models); Procedure For Tilting Down (Manual Tilt Models) - Yamaha 20D Owner's Manual

the engine will be tilted for more than a
few minutes. Otherwise fuel may leak.
ECM00241
CAUTION:
Before tilting the outboard motor, stop
G
the engine by following the procedure
on page 34. Never tilt the outboard mo-
tor while the engine is running. Severe
damage from overheating can result.
Do not tilt up the engine by pushing the
G
tiller handle (if equipped) because this
could break the handle.
EMU27954
Procedure for tilting up (manual tilt
models)
1. Place the remote control lever / gear
shift lever in neutral.
2. Place the tilt lock lever in the release po-
sition.
3.
ECM01640
CAUTION:
Do not use the tilt support lever or knob
when trailering the boat. The outboard
N motor could shake loose from the tilt sup-
port and fall. If the motor cannot be trail-
ered in the normal running position, use
an additional support device to secure it
in the tilt position. For more detailed in-
formation, see page 43.
EMU28022
Procedure for tilting down (manual
ZMU03724
tilt models)
1.
Hold the rear of the top cowling with one
hand, tilt the engine up, and turn the tilt
support lever to the lock position and
support the engine.
Place the tilt lock lever in the release/
down position or return the shallow wa-
ter lever to its original position.
Operation
ZMU03726
ZMU03747
38