Filling Fuel And Engine Oil; Filling Fuel For Portable Tank; Filling Oil For Manual Starter Model - Yamaha 20D Owner's Manual

lows:
1. Use a 50:1 gasoline to oil mixture to start
the engine.
2. Start the engine. Leave it idling.
EWM01330
WARNING
Do not touch or remove electrical parts
G
when starting or during operation.
Keep hands, hair, and clothes away
G
from the flywheel and other rotating
parts while the engine is running.
3. Watch for oil flowing through the oil feed
pipes. After any air in the oil lines has
been expelled, the oil injection system
should supply oil normally. If no oil is
flowing after 10 minutes of idling, consult
your Yamaha dealer.
ECM01260
CAUTION:
Be sure to take the above steps when op-
erating the engine after a long period of
storage. Otherwise engine seizure could
occur.
EMU27233

Filling fuel and engine oil

EMU27242

Filling fuel for portable tank

EWM00060
WARNING
Gasoline and its vapors are highly flam-
mable and explosive. Keep away from
sparks, cigarettes, flames, or other
sources of ignition.
1. Remove the fuel tank cap.
2. Fill the fuel tank carefully.
3. Close the cap securely after refueling.
Wipe up any spilled fuel.
Fuel tank capacity (if equipped Yamaha
fuel tank):
25 L (6.60 US gal) (5.50 Imp.gal)
EMU27301

Filling oil for manual starter model

EWM00530
WARNING
Do not add gasoline into the oil tank. Fire
ZMU03710
or explosion could result.
This engine uses the Yamaha oil injection
system, which provides superior lubrication
by ensuring the proper oil ratio for all operat-
ing conditions. No fuel premixing is needed.
Simply pour gasoline into the fuel tank and
oil into the oil tank. Convenient indicator seg-
ments indicate the status of the oil supply.
For details on reading the indicator seg-
ments, see page 26.
To fill the engine oil tank, proceed as follows:
Engine oil tank capacity:
0.7 L (0.74 US qt) (0.62 Imp.qt)
Operation
ZMU03012
24