Yamaha SR400 Owner's Manual page 32

For your safety – pre-operation checks
ITEM
Drive chain
1
Wheels and tires
2
Shift pedal
3
Brake pedal
4
Brake and clutch
levers
Centerstand, sidestand
5
Chassis fasteners
6
Instruments, lights,
signals and switches
7
Sidestand switch
8
9
10
11
12
13
14
• Check chain slack.
• Adjust if necessary.
• Check chain condition.
• Lubricate if necessary.
• Check for damage.
• Check tire condition and tread depth.
• Check air pressure.
• Correct if necessary.
• Make sure that operation is smooth.
• Correct if necessary.
• Make sure that operation is smooth.
• Lubricate pedal pivoting point if necessary.
• Make sure that operation is smooth.
• Lubricate lever pivoting points if necessary.
• Make sure that operation is smooth.
• Lubricate pivots if necessary.
• Make sure that all nuts, bolts and screws are properly
tightened.
• Tighten if necessary.
• Check operation.
• Correct if necessary.
• Check operation of ignition circuit cut-off system.
• If system is not working correctly, have Yamaha dealer
check vehicle.
4-2
CHECKS PAGE
6-25,
6-26
6-15,
6-17
6-21
6-28
6-28
6-29
—
—
3-14