Replacing The Tail/Brake Light Bulb - Yamaha SR400 Owner's Manual

Periodic maintenance and adjustment
3. Remove the burnt-out bulb by
pushing it in and turning it counter-
clockwise.
1
1. Auxiliary light bulb socket
2. Auxiliary light bulb
4. Insert a new bulb into the socket,
push it in, and then turn it clock-
wise until it stops.
5. Install the socket (together with the
bulb) by pushing it in and turning it
clockwise until it stops.
6. Install the headlight unit by install-
ing the screws.
Replacing the tail/brake light
bulb
1. Remove the tail/brake light lens by
2
1. Screw
2. Tail/brake light lens
2. Remove the burnt-out bulb by
1. Tail/brake light bulb
3. Insert a new bulb into the socket,
4. Install the lens by installing the
6-37
removing the screws.
1
pushing it in and turning it counter-
clockwise.
1
push it in, and then turn it clock-
wise until it stops.
screws. NOTICE: Do not over-
tighten the screws, otherwise
the lens may break.
EAU24135
1
2
2
3
4
5
6
7
8
9
10
11
12
[ECA10682]
13
14