Checking The Brake Fluid Level - Yamaha SR400 Owner's Manual

Periodic maintenance and adjustment
Rear brake shoes
2
1
1. Brake shoe wear indicator
2. Brake shoe wear limit line
The rear brake is provided with a wear
indicator, which allows you to check the
brake shoe wear without having to dis-
assemble the brake. To check the
brake shoe wear, check the position of
the wear indicator while applying the
brake. If a brake shoe has worn to the
point that the wear indicator reaches
the wear limit line, have a Yamaha
dealer replace the brake shoes as a
set.
EAU22541

Checking the brake fluid level

Before riding, check that the brake fluid
is above the minimum level mark.
Check the brake fluid level with the top
of the reservoir level. Replenish the
brake fluid if necessary.
1
1. Minimum level mark
Specified brake fluid:
DOT 4
WARNING
Improper maintenance can result in
loss of braking ability. Observe
these precautions:
Insufficient brake fluid may al-

low air to enter the brake sys-
tem,
performance.
Clean the filler cap before re-

moving. Use only DOT 4 brake
fluid from a sealed container.
Use only the specified brake flu-

id; otherwise, the rubber seals
may deteriorate, causing leak-
age.
Refill with the same type of

brake fluid. Adding a brake fluid
other than DOT 4 may result in a
harmful chemical reaction.
Be careful that water does not

enter the brake fluid reservoir
6-23
EAU32346
EWA15991
reducing braking
1
2
3
4
5
6
7
8
9
10
11
12
13
14