Main Switch; Power Trim And Tilt Switch On Remote Control - Yamaha F150 Owner's Manual

1. Engine shut-off cord (lanyard)
2. Clip
3. Engine shut-off switch
1. Engine shut-off cord (lanyard)
2. Clip
3. Engine shut-off switch
EMU26092

Main switch

The main switch controls the ignition system;
its operation is described below.
 "
" (off)
With the main switch in the "
tion, the electrical circuits are off, and the key
can be removed.
 "
" (on)
With the main switch in the "
the electrical circuits are on, and the key can-
not be removed.
 "
" (start)
2
1
ZMU01716
ON ON
OFF START OFF START
3
2
1
ZMU05818
" (off) posi-
" (on) position,
With the main switch in the "
sition, the starter motor turns to start the en-
gine. When the key is released, it returns
3 automatically to the "
OFF
EMU32054
Power trim and tilt switch on remote
control
The power trim and tilt system adjusts the
outboard motor angle in relation to the tran-
som. Pushing the switch "
outboard motor up, and then tilts it up. Push-
ing the switch "
motor down and trims it down. When the
switch is released, the outboard motor will
stop in its current position. For instructions
on using the power trim and tilt switch, see
pages 64 and 66.
Components
" (on) position.
ON
OFF START
ON ON
START OFF START
" (up) trims the
" (down) tilts the outboard
" (start) po-
ZMU01718
ZMU05821
31