Luggage Strap Holders - Yamaha YZF-R1 Owner's Manual

INSTRUMENT AND CONTROL FUNCTIONS
NOTE:
Although the total number of clicks of a
damping force adjusting mechanism
may not exactly match the specifica-
tions listed due to small differences in
production, the actual number of clicks
always represents the entire adjust-
ment range. To obtain a precise adjust-
3
ment, it would be advisable to check
the number of clicks of each damping
force adjusting mechanism and to mod-
ify the specifications as necessary.
WARNING
This shock absorber contains highly
pressurized nitrogen gas. For prop-
er handling, read and understand
the following information before
handling the shock absorber. The
manufacturer cannot be held re-
sponsible for property damage or
personal injury that may result from
improper handling.
G
Do not tamper with or attempt to
open the gas cylinder.
G
Do not subject the shock ab-
sorber to an open flame or other
high heat sources, otherwise it
may explode due to excessive
gas pressure.
G
Do not deform or damage the
gas cylinder in any way, as this
will result in poor damping per-
formance.
G Always have a Yamaha dealer
service the shock absorber.
EWA10220

Luggage strap holders

1. Luggage strap holder
2. Hook
There are four luggage strap holders on
the bottom of the passenger seat. To
use the strap holders, remove the pas-
senger seat, unhook the straps from
the hooks, and then install the seat with
the straps hanging out from under the
passenger seat. (See page 3-19.)
3-24
EAU15181