Yamaha YZF-R1 Owner's Manual page 26

INSTRUMENT AND CONTROL FUNCTIONS
To adjust the brightness of the multi-
function meter displays and tachometer
1. Turn the key to "OFF".
2. Push and hold the "SELECT" but-
ton.
3. Turn the key to "ON", and then re-
lease the "SELECT" button after
five seconds.
3
4. Push the "RESET" button to select
the desired brightness level.
5. Push the "SELECT" button to con-
firm the selected brightness level.
The control mode changes to the
shift timing indicator light activity
function.
To set the shift timing indicator light ac-
tivity function
1. Push the "RESET" button to select
one of the following indicator light
activity settings:
G The indicator light will stay on
when activated. (This setting
is selected when the indicator
light stays on.)
G
The indicator light will flash
when activated. (This setting
is selected when the indicator
light flashes four times per
second.)
G
The indicator light is deacti-
vated; in other words, it will
not come on or flash. (This
setting is selected when the
indicator light flashes once
every two seconds.)
2. Push the "SELECT" button to con-
firm the selected indicator light ac-
tivity. The control mode changes to
the shift timing indicator light acti-
vation function.
To set the shift timing indicator light ac-
tivation function
NOTE:
The shift timing indicator light activation
function can be set between 7000 r/min
and 15000 r/min. From 7000 r/min to
12000 r/min, the indicator light can be
set in increments of 500 r/min. From
12000 r/min to 15000 r/min, the indica-
tor light can be set in increments of 200
r/min.
3-12
1. Push the "RESET" button to select
the desired engine speed for acti-
vating the indicator light.
2. Push the "SELECT" button to con-
firm the selected engine speed.
The control mode changes to the
shift timing indicator light deactiva-
tion function.
To set the shift timing indicator light de-
activation function
NOTE:
G
The shift timing indicator light de-
activation function can be set be-
tween 7000 r/min and 15000 r/min.
From 7000 r/min to 12000 r/min,
the indicator light can be set in in-
crements of 500 r/min. From
12000 r/min to 15000 r/min, the in-
dicator light can be set in incre-
ments of 200 r/min.
G Be sure to set the deactivation
function to a higher engine speed
than for the activation function,
otherwise the shift timing indicator
light will remain deactivated.