Operation And Important Riding Points; Starting And Warming Up A Cold Engine - Yamaha CRYPTON T110C Owner's Manual

OPERATION AND IMPORTANT RIDING POINTS

Read the Owner's Manual carefully to
become familiar with all controls. If
there is a control or function you do not
understand, ask your Yamaha dealer.
WARNING
Failure to familiarize yourself with
the controls can lead to loss of con-
trol, which could cause an accident
or injury.
5
EAU15951
Starting and warming up a
cold engine
1. Turn the key to "
2. Shift the transmission into the neu-
tral position. The neutral indicator
EWA10271
light should come on. If not, ask a
Yamaha dealer to check the elec-
trical circuit.
3. Place the vehicle on the center-
stand.
WARNING
Before starting the engine, make
sure the transmission is in neutral
and that the vehicle is placed on the
centerstand.
4. Turn the starter (choke) on and
completely close the throttle. (See
page 3-7.)
5. Start the engine by pushing the
start switch or by pushing the kick-
starter lever down.
If the engine fails to start by push-
ing the start switch, release the
switch, wait a few seconds, and
then try again. Each starting at-
tempt should be as short as possi-
EAU47852
".
6. After starting the engine, move the
7. When the engine is warm, turn the
TIP
EWA14200
The engine is warm when it responds
quickly to the throttle with the starter
(choke) turned off.
NOTICE
For maximum engine life, never ac-
celerate hard when the engine is
cold!
5-1
ble to preserve the battery. Do not
crank the engine more than 10
seconds on any one attempt. If the
engine does not start with the
starter motor, try using the kick-
starter.
starter (choke) back halfway.
starter (choke) off.
ECA11042