PERIODIC MAINTENANCE AND ADJUSTMENT
Front wheel
To remove the front wheel
WARNING
To avoid injury, securely support the
vehicle so there is no danger of it
falling over.
1. Place the motorcycle on the cen-
terstand.
2. Remove the rubber cap, and then
loosen the wheel axle nut.
6
2
1
1. Rubber cap
2. Wheel axle nut
3. Disconnect the speedometer ca-
ble from the front wheel.
EAU24360
EAU55220
EWA10821
1. Speedometer cable
4. Remove the wheel axle nut and
the washer.
2
1
1. Wheel axle nut
2. Washer
5. Pull the wheel axle out, and then
remove the wheel. NOTICE: Do
not apply the brake after the
wheel has been removed to-
1
1. Wheel axle
To install the front wheel
1. Install the speedometer gear unit
6-33
gether with the brake disc, oth-
erwise the brake pads will be
forced shut.
[ECA11071]
into the wheel hub so that the pro-
jection on the wheel hub fits in ei-
ther slot of the speedometer gear
unit.
1
EAU55200