Replacing The Tail/Brake Light Bulb - Yamaha CRYPTON T110C Owner's Manual

PERIODIC MAINTENANCE AND ADJUSTMENT
1
1. Do not touch the glass part of the bulb.
1. Remove cowling A. (See page
6-7.)
2. Remove the headlight bulb cover.
6
1. Headlight bulb cover
3. Remove the headlight bulb holder
(together with the bulb) by turning
it counterclockwise.
1. Headlight bulb holder
2. Headlight bulb
4. Remove the burnt-out bulb by
pushing it in and turning it counter-
clockwise.
5. Place a new bulb into the holder,
1
push it in, and then turn it clock-
wise until it stops.
6. Install the bulb holder (together
with the bulb) by turning it clock-
wise.
7. Install the headlight bulb cover.
8. Install the cowling.
9. Have a Yamaha dealer adjust the
headlight beam if necessary.
6-29
Replacing the tail/brake light
1
bulb
2
1. Remove the tail/brake light outer
lens by removing the screws.
1. Outer lens
2. Screw
2. Remove the inner lens by pulling it
out.
1
1. Inner lens
EAU47660
1
2