PERIODIC MAINTENANCE AND ADJUSTMENT
Rear wheel
To remove the rear wheel
WARNING
To avoid injury, securely support the
vehicle so there is no danger of it
falling over.
1. Place the motorcycle on the cen-
terstand.
2. Loosen the wheel axle nut.
6
1. Wheel axle nut
3. Remove the drive chain case by
removing the bolts.
EAU25080
EAU55240
EWA10821
2
1. Drive chain case
2. Bolt
4. Loosen the locknut and the drive
chain slack adjusting nut on both
ends of the swingarm.
1
1
1. Locknut
2. Drive chain slack adjusting nut
5. Disconnect the brake torque rod
1
2
1. Brake torque rod
2. Cotter pin
3. Brake torque rod nut and bolt
2
4. Washer
6. Remove the brake pedal free play
6-35
from the brake shoe plate by re-
moving the cotter pin, the nut, the
washer and the bolt.
1
4
adjusting nut, and then disconnect
the brake rod from the brake cam-
shaft lever.
2
3