Back Of Original Image Appears In Scanned Image; Scanned Characters Are Blurry; Characters Are Not Recognized During Conversion To Editable Text (Ocr) - Epson DS-510 User Manual

Spots or Lines Appear in All Scanned Images
Scanned Image Edges are Cropped
Parent topic:

Back of Original Image Appears in Scanned Image

If an image from the back of a thin original appears in your scanned image, make sure you selected the
correct Image Type setting for your original and select the Text Enhancement setting in Epson Scan.
Parent topic:
Related references
Available Image Adjustments
Related tasks
Scanning with Epson Scan

Scanned Characters are Blurry

If characters in your scanned images are blurry, try these solutions:
• Make sure you do not move the scanner or original while scanning.
• Operate the scanner on a flat, stable surface.
• Adjust these Epson Scan settings (if available) and try scanning again:
• Select the Text Enhancement setting.
• Adjust the Threshold setting.
• Increase the Resolution setting.
Parent topic:
Related references
Available Image Adjustments
Related tasks
Scanning with Epson Scan

Characters are not Recognized During Conversion to Editable Text (OCR)

If characters in your scanned images are not recognized during OCR conversion (Windows only), try
these solutions:
• Make sure your original is straight.
Solving Problems
Solving Scanned Image Quality Problems
Solving Scanned Image Quality Problems
72