Table of Contents
Advertisement
Available languages
Available languages
7
/
"
7
8
(200 mm)
3 3 1"
31"
2
2
(200 mm
(200 mm
(200 mm
2
2
)
)
Product Dimensions
■
The unit is 69¹¹⁄₁₆" (177.0 cm) high, 21⁹⁄₃₂" (54.0 cm) wide,
and 21¹⁵⁄₃₂" (54.5 cm) deep (front-to-back).
■
The refrigerator door (including hinges (x2)) is 20⁵⁄
(105.75 cm) high. The Freezer door (including hinges (x2))
is 26⁵⁄₁₆" (66.85 cm) high.
The space between the refrigerator and freezer doors is 2³⁄₈"
(6.0 cm). The space between the door hinges is ¹³⁄₃₂" (1.0 cm).
■
A grounded 3 prong electrical outlet should be placed within
4" (10.2 cm) of the right side cabinets or end panel. See
"Electrical Requirements" for additional information.
Electrical Requirements
WARNING
Electrical Shock Hazard
Plug into a grounded 3 prong outlet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions can result in death,
fire, or electrical shock.
Before you move your refrigerator into its final location, it is
important to make sure you have the proper electrical
connection.
Recommended Grounding Method
A 115 volt, 60 Hz., AC only, 15- or 20-amp fused, grounded
electrical supply is required. It is recommended that a separate
circuit serving only your refrigerator be provided. Use an outlet
that cannot be turned off by a switch. Do not use an
extension cord.
7
7
/
/
"
"
7
7
8
8
(200 mm)
(200 mm)
(200 mm)
7
7
/
/
"
"
7
7
8
8
(200 mm)
(200 mm)
(200 mm)
2
2
31"
31"
31"
31"
2
2
(200 mm
(200 mm
(200 mm
)
)
(200 mm
(200 mm
(200 mm
₈"
⁄
IMPORTANT: If this product is connected to a GFCI (Ground
Fault Circuit Interrupter) protected outlet, nuisance tripping of the
power supply may occur, resulting in loss of cooling. Food quality
and flavor may be affected. If nuisance tripping has occurred,
and if the condition of the food appears poor, dispose of it.
NOTE: Before performing any type of installation or cleaning,
disconnect power at the circuit breaker box.
When you are finished, reconnect power at the circuit breaker
box. Then reset the control to the desired setting.
INSTALLATION
INSTRUCTIONS
2
2
Unpack the Refrigerator
2
2
)
)
Use two or more people to move and install
refrigerator.
Failure to do so can result in back or other injury.
IMPORTANT:
■
Keep the cardboard shipping piece or plywood under the
refrigerator until it is installed in the operating location.
1. Save all literature that is provided inside the refrigerator, and
do not remove the literature packet taped to the outside of
the refrigerator.
2. Remove the four brackets (two on each side) that attach the
shipping base to the refrigerator bottom.
NOTE: Do not remove tape and door bracing until the
refrigerator is in its final location.
Plug in Refrigerator
Plug into a grounded 3 prong outlet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions can result in death,
fire, or electrical shock.
1. Plug into a grounded 3 prong outlet.
WARNING
Excessive Weight Hazard
WARNING
Electrical Shock Hazard
5
Hide quick links:
Advertisement
Table of Contents
