TM-L100
User's Manual
Part Names
Top/Front/Rear
1
Panel LED
2
Cover open lever
3
Feed button
4
Power button
5
Roll paper cover
6
NFC Tag
7
Top cover
8
Rear cover
Part Names
The LED lights indicate printer status.
Operate this lever to open the roll paper cover.
Press this button once to feed the roll paper for one line. Hold down this button to
continue feeding the roll paper.
This button turns the printer on or off.
Open this cover when installing or replacing the roll paper.
A mark is printed here to indicate the position of the NFC tag.
To establish communication with an NFC device, bring the device close to this mark.
Open this cover if the roll paper cover does not open.
Open this cover when connecting the DC cable of the AC adapter, or interface cables of
peripheral devices.
6