Olivetti D-COPIA 1800 Operation Manual page 18

Printer Driver Settings
10
Adjust the number of watermarks printed and the amount of separation space between the
text.
•
•
11
Select Centered (default) or User defined to specify the text position.
•
•
NOTE:
desired position.
12
Specify the text angle. Select Diagonal (slanted to the upper right) or select User defined,
which enables you to enter your preferred angle (measured counterclockwise from 0 to 360
degrees).
User defined: Drag the slider horizontally or enter the value.The angle of the text can be
manually adjusted by placing the mouse pointer on the center or end of the text and
dragging it to the desired position.
NOTE:
desired angle.
13
Click OK.
1-12
Enter the number of watermarks in the Count field.
Enter the value for separation between watermarks in the Spacing spin box in inches
or millimeters.
User defined (default): Bases the watermark text position on the X and Y values for
the horizontal and vertical coordinates.
Centered: Places the watermark text in the center of the page.
Manual Adjustment: Hold the left mouse button while dragging the watermark image to the
Manual Adjustment: Hold the left mouse button while dragging the watermark image to the