Garmin GTX330 Installation Manual page 12

The GTX 330 supports the following list of Binary Data Selector (BDS) registers:
•
BDS (0,0) Air Initiated Comm-B (AICB)
•
BDS (1,0) Data Link Capability Report
•
BDS (4,0) Selected Vertical Intention (EHS Only)
•
BDS (5,0) Track and Turn Report (EHS Only)
•
BDS (6,0) Heading and Speed Report (EHS Only)
•
BDS (1,7) Common Usage Ground Initiated Comm-B (GICB) Capability Report
•
BDS (1,8) Mode S Specific Services GICB Capability Report
•
BDS (1,9) Mode S Specific Services GICB Capability Report
•
BDS (1,D) Mode S Specific Services Protocols (MSP) Capability Report
•
BDS (2,0) Aircraft Identification
•
BDS (0,5) Extended Squitter Airborne Position (ES Enabled Units Only)
•
BDS (0,6) Extended Squitter Surface Position (ES Enabled Units Only)
•
BDS (0,7) Extended Squitter Status Position (ES Enabled Units Only)
•
BDS (0,8) Extended Squitter Aircraft Identification and Category (ES Enabled Units Only)
•
BDS (0,9) Extended Squitter Airborne Velocity (ES Enabled Units Only)
•
BDS (0,A) Extended Squitter Event Driven Information (ES Enabled Units Only)
•
BDS (6,1) Emergency/Priority Status (ES Enabled Units Only)
•
BDS (6,5) Aircraft Operational Status (ES Enabled Units Only)
BDS register information is presented for the installation agency to understand the functionality of the
GTX 330, and make a determination that the unit complies with the requirements of their civil aviation
authorities. No further wiring or configuration programming is required for the unit.
Note that BDS (3,0) is only required for transponders compatible with ACAS/TCAS II. The GTX 330
does not support BDS (3,0).
Page 1-4
Revision R
GTX 330/GTX 330D Installation Manual
190-00207-02