Venting The Front Panel; Anti-Pinch Feature; Removing Panels - Jeep RENEGADE 2016 User Manual

OPERATING YOUR VEHICLE

Venting The Front Panel

To vent the front panel push and release the vent switch.
During the vent operation any push on the Open/Close switch will stop the closing of
the panel.
NOTE:
If the My Sky is in open position, the vent switch must be held until the panel vents.

Anti-Pinch Feature

The front panel of the retractable roof is equipped with a anti-pinch safety system
that is able to detect the presence of an obstacle during the opening and closing
motion of the panel.
When this event occurs, the front panel stops and reverses immediately.
NOTE:
With both panels removed the retractable roof cannot be opened or closed.
Removing And Installing Panels
NOTE:
• Remove the panels only when the vehicle is stationary.
• The rear panel can be removed only when the front panel is completely closed or
removed.

Removing Panels

1. Front panel must be in the closed position to remove panels.
2. Locate the My Sky Key inside the
panel storage bag in the cargo area.
My Sky Key Location
70