Table of Contents
Advertisement
ELECTRONICS
Setting The Time
Uconnect 6.5NAV synchronizes time automatically via GPS, so should not require
any time adjustment. If you do need to set the time manually, follow the instructions
below.
• Turn the unit on, then press the time display at the top of the screen, a pop-up will
ask if you want to set the time. Press "Yes."
• If the time is not displayed at the top of the screen, push the Settings button. In
the Settings screen, press the "Clock" button on the touchscreen, then select
"ON" for "Show Time Status."
• Press "+" or "–" next to Set Time Hours and Set Time Minutes to adjust the time.
• If these features are not available, press "Off" for Sync with GPS.
• Press "X" to exit out of the Clock Setting screen.
Audio Setting
• Press the "Audio" button on the touchscreen to activate the Audio settings screen
to adjust Balance\Fade, Equalizer, and Speed Adjusted Volume.
• You can return to the Radio screen by pressing the "X" or back arrow located at the
top right.
Balance/Fade
• Press the "Balance/Fade" button on the touchscreen to Balance audio between
the front speakers or fade the audio between the rear and front speakers.
• Pressing the "Front," "Rear," "Left," or "Right" buttons on the touchscreen or
press and drag the Speaker Icon to adjust the Balance/Fade.
Equalizer
• Press the "Equalizer" button on the touchscreen to activate the Equalizer screen.
• Press the "+" or "-" buttons on the touchscreen, or press and drag over the level
bar for each of the equalizer bands. The level value, which spans between plus or
minus 9, is displayed at the bottom of each of the Bands.
Speed Adjusted Volume — If Equipped
• Press the "Speed Adjusted Volume" button on the touchscreen to activate the
Speed Adjusted Volume screen. The Speed Adjusted Volume is adjusted by
pressing the "+" and "–" buttons or by pressing and dragging over the level bar.
This alters the automatic adjustment of the audio volume with variation to vehicle
speed.
Surround Sound — If Equipped
• Press the "Surround Sound" button on the touchscreen, select "On" or "Off"
followed by pressing the back arrow button on the touchscreen. When this feature
is activated, it provides simulated surround sound mode.
108
Advertisement
Table of Contents
